Table of Contents
Advertisement
(Using the SEF-54PZF in Combination with
another SEF-54PZF)
1
Firstly, set the wireless mode and channel of
the flash unit attached to the camera, and reg-
ister them on the camera.
① Turn the camera off and then attach the
SEF-54PZF to the hot shoe of the camera.
② Set the power switch of the flash unit to
(WIRELESS).
46
③ Press the wireless mode button (M/C/S) the
number of times required to select CON-
TROL or MASTER.
CONTROL : For using the flash unit
attached to the camera as the
control flash.
MASTER
: For using both flash units as
main flashes.
④ Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
⑤ Press the channel button (CH) and select a
channel from 1CH to 4CH.
Advertisement
Table of Contents
