Table of Contents
Advertisement
■ Leading Curtain Sync Mode
Refer to page 31 for the features and conditions of
use of this sync mode.
Procedure
1
Set the power switch to the (ON) position.
2
Set the sync mode switch to leading curtain
sync (
)
3
Confirm that the subject is within the effective
flash range and the ready lamp is lit. Then
take a picture.
■ Trailing Curtain Sync Mode
Refer to page 31 for the features and conditions of
use of this sync mode.
32
Procedure
1
Set the power switch to the (ON) position.
2
Set the sync mode switch to trailing curtain
sync (
)
3
Confirm that the subject is within the effective
flash range and the ready lamp is lit. Then
take a picture.
●The flash unit will switch to the trailing cur-
tain sync mode when the shutter release but-
ton is pressed halfway down.
Advertisement
Table of Contents
