Panasonic EBL128 Planning Instructions page 103

Panasonic Electric Works Nordic AB
MEW01090 Rev: 3
Explanations:
Zone-Address column
Shows the already programmed alarm points (e.g. 01-01, 01-02, 02-01
etc.). Only the texts have to be typed / edited in the "Text" column.
Shows the already programmed zones, i.e. MIO unit 3361 zone line
inputs programmed with address "00" (i.e. ZZ – 00) and 8 zones
expansion board 4580 zone line inputs.
Only the texts have to be typed / edited in the "Text" column.
Text column
Shows already programmed alarm point / zone texts. Texts can be
typed / edited.
NOTE! If any alarm point shall have a different alarm text in one or
more of the "display units" 1826, 1828, 1735, 1736 or 1728
has to be typed in the Win128 "Text editor", for the "display unit"
respectively (Properties | Edit texts...):
Explanations (Text editor for one specific "display unit"):
Zone-Address column
Shows the already programmed alarm points (e.g. 01-01, 01-02, 02-01
etc.).
Shows the already programmed zones, i.e. MIO unit 3361 zone line
inputs programmed with address "00" (i.e. as ZZ – 00) and 8 zones
expansion board 4580 zone line inputs.
Text in control unit column (only information that can not be edited)
113
Regarding text priority order etc. see Technical Description (chapt. "User
definable text messages") for the "display unit" respectively.
101
EBL128 Planning Instructions V1.1.x
113
, the text