Mitsubishi Electric HS-MD3000E Installation And Operation Manual page 7

SEARCH/CLEAR button
Press to display the <SEARCH FUNCTION> menu.
When setting the current time on MENU 3, use to select the
setting item in the upward direction.
TRACKING buttons
Press to reduce/eliminate the noise during playback.
FRAME/FIELD/ENTER button
During playback, still picture or playback using the shuttle ring,
press to display the freeze frame picture.
During freeze frame picture, press to switch the picture in the
following order. When FREEZE MODE in MENU 2 is set to
FRAME, the freeze frame picture is switched in the order of
frame still the first field the second field frame still
... When FREEZE MODE in MENU 2 is set to FIELD, the freeze
frame picture is switched in the order of the first field the
second field frame still the first field ...
Also, use to set the menus.
PROGRAM button
Press to set the programmed playback.
MENU button
When the VCR is turned on, press to display or exit the menus.
Note
• Press the button for about 2 seconds.
MARK IN A/B buttons
Press to memorize the current counter.
AUDIO DUB button
Use for audio dubbing. During still picture, press to pause
audio dubbing. Press PAUSE button to resume audio dubbing.
Press this button and PLAY button at the same time to start
audio dubbing from stop mode.
JOG dial
Use to forward or reverse a tape field-by-field.
Also use to set the menus.
SHUTTLE ring
Use for special effects playback.
3
Introduction
Reference page