Time Date Search - Mitsubishi Electric HS-MD3000E Installation And Operation Manual

Time date search

You can easily find a picture recorded at specific date and time.
1. Press SEARCH button several times.
• TIME DATE SEARCH
highlighted.
2. Press ENTER button.
• <TIME DATE SEARCH> menu
appears.
3. Press ENTER button again.
• 10-digit of Date display will flash.
4. Turn JOG to set Date (10-digit and 1-digit) you wish to find
and press ENTER button.
To exit the <TIME DATE SEARCH> menu without
searching, press SEARCH or STOP button.
5. Set Month, Year, 10-hour digit, 1-hour digit, 10-minute digit
and 1-minute digit of Time in a similar fashion.
• When Date, Month, Year or Time is set to
searches all available settings.
For example, when you set Month to
all months.
6. Press FF or REW button.
• Pressing FF button proceeds the search in the forward
direction.
• Pressing REW button proceeds the search in the reverse
direction.
• When the recorded picture is found, the VCR starts
playback.
To quit while searching, press STOP button.
Note
• To carry out the time date search, set TIME CODE REC in
MENU 1 to ON when the tape is recorded.
• A time code is written on a tape when the recording is started
and at each minute during recording.
• The time date search may not function correctly, if you use a
tape with a poor recording quality.
• The time date search will not function when using a tape
recorded with other VCRs, a tape recorded without setting the
day and present time or a tape recorded without writing a time
code.
Info.
• When the desired part of the tape is not found in the selected
direction, the VCR automatically searches in the opposite
direction.
Reference page
<SEARCH FUNCTION>
BLANK SEARCH
COUNTER MEMORY STOP
is
SKIP SEARCH
INDEX SEARCH
TIME DATE SEARCH
<TIME DATE SEARCH>
– – 20 :
Date Year
Time
Month
, the VCR
, the VCR searches
Advanced Functions
11