Language Selection; Menu 1; Menu 2 - Mitsubishi Electric HS-MD3000E Installation And Operation Manual

LANGUAGE SELECTION

The menu which appears on screen offers 7 languages.
This menu appears by pressing MENU button, when the VCR is
turned on for the first time after the purchase, or when RESET
button is pressed during use.
1. Press MENU button.
• The menu as shown to the right
appears.
2. Turn JOG to select the desired
language.
3. Press ENTER button.
• <MENU 1> in the selected
language appears on screen.
4. Press MENU button several times to exit.
Note
• After first time setup and selecting the language to be used,
the only way to go back and access the main menu in the
seven languages is to PRESS the RESET button found on the
rear panel. The RESET button can be accessed with a small
pointed object. The RESET button is pressed, repeat steps 1
to 4 above.

MENU 1

Setting operation of VCR when the
tape reaches its end during
recording (REC TAPE END)
The VCR's function when the tape
reaches its end during recording is as
follows.
STOP : The tape stops.
REW : Rewinds the tape to the beginning and stops.
EJECT : Ejects the tape.
Setting operation of VCR when the tape reaches its end
during playback/fast forwarding (TAPE END)
The VCR's function when the tape reaches its end during
playback/fast forwarding is as follows.
STOP : The tape stops.
REW : Rewinds the tape to the beginning and stops.
Setting operation of VCR when the tape is loaded (TAPE IN)
The VCR's function when the tape is loaded to the VCR is as
follows.
STOP : The tape stops.
REW : Rewinds the tape to the beginning and stops.
Setting the tape length (TAPE LENGTH)
E-180 : Select when using a E-180 or SE-180 tape.
E-240 : Select when using a E-240 or SE-240 tape.
Recording the index signal (VISS)
OFF : The index signal is not recorded.
REC : The index signal is recorded when the recording
starts from STOP mode. When the recording
starts from the REC PAUSE mode, the index
signal is not recorded.
REC/PAUSE : The index signal is recorded when the recording
starts from STOP or REC PAUSE mode.
Recording the time code (TIME CODE REC)
ON : The time code is recorded.
OFF : The time code is not recorded.
Reference page
Displaying the time code (TIME DATE DISP.)
OFF
TOP
BOTTOM
ENGLISH
Note
DEUTSCH
FRANÇAIS
•
ESPAÑOL
NEDERLANDS
ITALIANO
Setting the operation mode of the FOOT SWITCH terminal
(FOOT SWITCH)
L.E
H.E
L.L
Setting the brightness of the fluorescent display (DIMMER)
ON
OFF

MENU 2

Setting the S-VHS/VHS mode
(S-VHS)
<MENU 1>
REC TAPE END STOP
AUTO : Records in S-VHS mode
TAPE END STOP
TAPE IN STOP
TAPE LENGTH E-180
VISS REC
TIME CODE REC OFF
TIME DATE DISP. OFF
OFF
FOOT SWITCH L.E
DIMMER OFF
Setting Y-NR (Y-NR)
ON
OFF
Setting C-NR (C-NR)
ON
OFF
Setting Y-ENHANCER (Y-ENHANCER)
ON
OFF
Adjusting the picture when playing back a tape (TBC)
ON
OFF
Setting COLOUR FILTER (COLOUR FILTER)
ON
OFF
Setting the freeze frame picture (FREEZE MODE)
FRAME : When the freeze frame picture is displayed, the frame
FIELD : When the freeze frame picture is displayed, the first
Setting the Hi-Fi audio recording (Hi-Fi AUDIO)
ON
OFF
: The time code is not displayed.
: The time code is displayed on the top of the
screen.
: The time code is displayed on the bottom of the
screen.
The time code is displayed only during playback.
: Operates when the low edge of the input signal is
input.
: Operates when the high edge of the input signal is
input.
: Operates when the low level of the input signal is
input.
: Select to darken the fluorescent display.
: Select not to darken the fluorescent display.
when using S-VHS
cassette.
: Records in VHS mode when
using either S-VHS cassette
or VHS cassette.
: Turns on the digital luminance noise reducer.
: Turns off the digital luminance noise reducer.
: Turns on the digital chroma noise reducer.
: Turns off the digital chroma noise reducer.
: Turns on the digital enhancer.
: Turns off the digital enhancer.
: The vibration or distortion in the playback picture is
reduced.
: The playback picture is not adjusted.
: Reduces the noise in the chrominance signals caused
by the high level of noise in the luminance signals.
: Turns off the COLOUR FILTER.
still picture is displayed initially.
field still picture is displayed initially.
: Hi-Fi audio is recorded.
: Hi-Fi audio is not recorded.
<MENU 2>
S-VHS AUTO
Y-NR ON
C-NR ON
Y-ENHANCER ON
TBC ON
COLOUR FILTER OFF
FREEZE MODE FRAME
Hi-Fi AUDIO ON
NORMAL AUDIO IN MIX
15
Installation