Fujitsu Eternus DX80 S2 User Manual page 120

Appendix A Event Notification Message List
A.2 Message List
Event type
M A3A20xxx
M A3B20xxx
M A3C20xxx
M A4130xxx
M A4430xxx
M A4A30xxx
M A4B30xxx
M A4C30xxx
M E0050nxx
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
SNMP Trap
Trap
Trap
code
Maintenance
No.
Info
7 A3A20xxx
7 A3B20xxx
7 A3C20xxx
7 A4130xxx
7 A4430xxx
7 A4A30xxx
7 A4B30xxx
7 A4C30xxx
7 E0050xxx
Copyright 2012 FUJITSU LIMITED
Upper: Message
Lower: Description
RAID Group#0xxx abnormal end of Copyback processing
because of source disk problem
Copyback to the replaced drive is halted because an error
is found in the copy source drive.
xxx: RAID group number (hexadecimal)
RAID Group#0xxx abnormal end of Copyback processing
Copyback to the replaced drive is halted.
xxx: RAID group number (hexadecimal)
RAID Group#0xxx retry procedure of Copyback
processing
Copyback to the replaced drive is retried.
xxx: RAID group number (hexadecimal)
RAID Group#0xxx start failure of Redundant Copy
processing
Redundant copy has not started.
xxx: RAID group number (hexadecimal)
RAID Group#0xxx start procedure of Redundant Copy
processing
Redundant copy is being performed.
xxx: RAID group number (hexadecimal)
RAID Group#0xxx abnormal end of Redundant Copy
processing because of source disk problem
Redundant copy to the replaced drive is halted because
an error is found in the copy source drive.
xxx: RAID group number (hexadecimal)
RAID Group#0xxx abnormal end of Redundant Copy
processing
Redundant copy is halted.
xxx: RAID group number (hexadecimal)
RAID Group#0xxx retry procedure of Redundant Copy
processing
Redundant copy is retried.
xxx: RAID group number (hexadecimal)
WRITE BAD DATA
Writing of Bad Data (data lost identifier) occurs.
xxx: RAID group number (hexadecimal)
120
Remarks
These mes-
sages are noti-
fied when
"Rebuild/
Copyback w/o
redundant" is
enabled for Error
Severity Level in
the event notifi-
cation setting.
They are not noti-
fied during main-
tenance
operations.
These mes-
sages are noti-
fied when
"Redundant" is
enabled for Error
Severity Level in
the event notifi-
cation setting.
They are not noti-
fied during main-
tenance
operations.
These mes-
sages are noti-
fied when "Bad
data" is enabled
for Error Severity
Level in the event
notification
setting. They are
not notified dur-
ing maintenance
operations.
P3AM-4842-03ENZ0