Calling Alert - Kenwood ProTalk TK-3201 Instruction Manual

5
6
1
Note: The transceiver will automatically return to normal operation if
no action is performed for 5 seconds.
C A
ALLING LERT
Calling alert tones are used to identify yourself to your party
members and inform them that you are about to make a call.
Your dealer can set up your transceiver with 1 of 10 different
calling alert tones. If each party member uses a different
calling alert tone, it is easy to know who is making the call.
To make a call using the calling alert tone, press and hold the
PTT switch, then press the key programmed as Calling Alert.
• The calling alert tone will transmit for the duration you press the
Calling Alert key.
Press the PTT switch within 5 seconds
to save the setting, otherwise the
operation will cancel.
A beep will sound and the transceiver
will announce the new Table number.
Turn the transceiver power OFF and
then ON again to activate the new
settings.
29