Getting Started - Kenwood ProTalk TK-3201 Instruction Manual

1
1
2
3
1
4
5

GETTING STARTED

Turn the Power switch/ Volume control
clockwise to switch the transceiver
power ON.
A beep sounds.
Press and hold the Monitor key to hear
background noise, then rotate the
Power switch/ Volume control to adjust
1
the volume.
Rotate the Channel selector to select
your desired channel.
When you receive an appropriate signal,
you will hear audio from the speaker.
To make a call, press and hold the PTT
switch, then press the Call key to alert
the other party members that you are
making a call. Release the Call key to
stop sending your alert tone.
Continue pressing the PTT switch, then
speak into the microphone to transmit.
Release the PTT switch to receive.
The LED lights red while transmitting.
For best sound quality, speak into the
microphone in your normal voice while
holding the microphone approximately
3 to 4 cm from your lips.
13