Voice Operated Transmission (Vox); Vox Gain - Kenwood ProTalk TK-3201 Instruction Manual

VOICE OPERATED TRANSMISSION (VOX)

Using the VOX feature, you can operate the transceiver
hands-free. In order to use this feature, however, you must
use an optional headset; VOX will not function with the built-in
microphone. For best operating conditions, we recommend
you use an optional headset with both an ear piece and a
microphone on a boom that rests in front of your mouth.
With VOX activated, your voice level will determine when the
transceiver transmits. Because of this, you must take care
that the ambient noise around you is not so loud that it causes
the transceiver to transmit. Due to the automatic switching
between transmission and reception, we recommend you set
the VOX Gain level such that it will not activate transmission
when in an area with excessive ambient noise.
VOX G
AIN
To activate the VOX function and set the VOX Gain level:
1
2
14
With the transceiver power OFF,
connect the headset to the transceiver
{page 12}.
The VOX function does not activate
when a headset is not connected to
the speaker/ microphone jack of the
transceiver.
Press and hold the Call key while
turning the transceiver power ON.
Continue to hold the Call key until the
LED lights orange and the transceiver
1 announces "VOX", then release the key.
Upon releasing the key, the transceiver
will announce the current VOX Gain level.