Channel Operating Frequencies - Kenwood ProTalk TK-3201 Instruction Manual

C O
HANNEL PERATING
To change the operating frequency of a channel:
1
Release the PTT switch and Call key.
2
The transceiver announces "Channel".
3
4
F
REQUENCIES
With the transceiver power OFF, press
and hold the PTT switch and Call key
while turning the transceiver power ON.
Continue to hold the PTT switch and Call
1
key until the LED lights orange and the
transceiver announces "Self".
Press and release the PTT switch, then
rotate the Channel selector to your
desired channel.
Upon pressing and releasing the PTT
1
switch, a beep will sound and the
transceiver announces "Table zero".
Press the Call key to increment the
Table number or the Monitor key to
decrement the number, to select the
new channel frequency.
Table numbers and their corresponding
operating frequencies are provided in the
table on page 22.
A voice announcement will inform you of
the currently selected Table number.
21