Vox Operation - Kenwood ProTalk TK-3201 Instruction Manual

VOX O
PERATION
Set up a VOX Gain level from 1 to 10 {page 14}.
1
To transmit, simply speak into the headset microphone.
2 2 You do not need to press the PTT switch; the transceiver
automatically detects your voice and begins transmitting.
To stop transmitting, stop speaking.
Transmission will continue momentarily after you stop
3
speaking, so ensure your transmission will not be cut off.
To deactivate the VOX function, set the VOX Gain level
4
{page 14} to OFF.
Note:
◆ While transmitting via VOX, all keys other than power OFF are
disabled.
◆ When you operate the VOX function, you must use an optional
KHS-1 or KHS-21 accessory.
◆ VOX will not operate when the battery level becomes too low.
(The LED will flash red in this state.)
16