Configuring Your System And Network; Configuration Tab Overview - HP StorageWorks 8000 - NAS User Manual

Configuring Your System and
Network

Configuration Tab Overview

During installation, an HP storage specialist configured your system as part of
setup using the web-based Configuration Wizard in the NAS 8000 web interface.
(See the HP StorageWorks NAS 8000 Installation Guide in your SIM Binder for
information.)
Now you may want to change some settings. Use the Configuration tab to
configure:
System Security. Specify the machines that may access Command View NAS
by editing the Command View NAS access list. Password-protect the
administration of your NAS 8000 web interface.
System Properties. These are informational settings. You can specify the
system name, date and time.
TCP/IP Settings. These settings allow you to set up your storage on your
network. You enter your IP address and Domain Name Service information
here.
High Availability. You can create, edit, and delete configurations; start or
stop a cluster; and start or stop a node. (This option only appears if you have a
high-availability NAS server.)
Networking Settings. The NAS 8000 supports Windows and UNIX
networking protocols.
Alerts/Logging. Enter these optional settings if you want to receive email or
server (SNMP) notification in case of a hardware failure or system alert. You
can specify a remote server to which you can redirect a copy of the system
log.
Mapping. You can map Windows users to UNIX users or Windows groups to
UNIX groups.
4
51