Creating And Editing An Rtp Task - HP StorageWorks 8000 - NAS User Manual

Enabling Virus and Backup Software

Creating and Editing an RTP Task

To create a new RTP task:
1. In the HP Virus Guard web interface, select Real Time Protection.
2. Select Actions > Create New RTP Task.
3. Enter a name for the real time protection task.
4. In the Detection tab, select the volumes to be scanned from the Available
5. Click the Actions tab and select what action you want the software to take
6. Click the Alerts tab. If you want to be notified when a virus is found, either
7. Click OK to create the scan task.
To edit an RTP task:
1. In the HP Virus Guard web interface, select Real Time Protection.
2. Select the RTP task you want to edit by clicking the row.
3. Select Actions > Edit RTP Task.
4. Select any of the tabs in the dialog box and make any modifications necessary.
160
Volumes list, then click Add.
when a virus is found:
— Log only
— Quarantine
— Rename
— Delete
— Clean (attempts to clean the virus)
— Clean, quarantine if unable to clean
— Clean, rename if unable to clean
enter an email address or check Send virus alerts using SNMP. To receive
alerts, you must enter information in the SNMP or email alert settings pages
in Command View NAS.
HP StorageWorks NAS 8000 User's Guide