Step 1: Set Up Your Speakers - Yamaha DSP-Z11 Owner's Manual

Quick start guide

Step 1: Set up your speakers

Place your speakers in the room and connect them to this unit.
1 1 2 2 3 3
Right front
presence speaker
Surround right
speaker
For other speaker configurations
If you want to connect less than 11 speakers and 2 subwoofers, connect the speakers as follows.
Front
Front left
right
11.2/11.1
9.2/9.1
7.2/7.1
6.2/6.1
5.2/5.1
3.2/3.1
2.2/2.1
14
En
1 Make sure that this unit and the subwoofers are unplugged from the AC wall
4 4
outlets.
2 Twist the exposed wires of the speaker cables together to prevent short circuits.
3 Do not let the bare speaker wires touch each other.
4 Do not let the bare speaker wires touch any metal part of this unit.
Right rear
presence speaker
Surround back
right speaker
Surround Surround
Center
left right
Loosen
Front right
speaker
Front
Surround Surround
presence
back left back right
left
Insert
Center speaker
Front Rear Rear
presence presence presence
right left right
Tighten
Subwoofer Subwoofer
left right