Customizing The Remote Control; Setting The Backlight Mode Of The Remote Control (Light); Setting Remote Control Codes (P-Set) - Yamaha DSP-Z11 Owner's Manual

Remote control features

Customizing the remote control

Use the setup mode of the remote control to customize the remote
control.
1
Press GSETUP on the remote control using a
ballpoint pen or similar object.
"SETUP" appears in the display window on the remote control.
2
Press 9k / n repeatedly to select the desired setup
mode.
Setup mode
SETUP Top setup mode menu.
Learning mode. Use this feature to program codes
LEARN
from other remote controls.
Preset mode. Use this feature to change the remote
P-SET
control code of each control area.
Renaming mode. Use this feature to change the
RNAME
name of each control area.
Macro programming mode. Use this feature to set
MACRO
the macro program.
Clearing mode. Use this feature to clear the
CLEAR
configurations of this unit.
Erase mode. Use this feature to erase the learned
ERASE
functions of each button.
Extended IR code mode. This feature is for the
EX-IR
authorized custom installers only.
Backlight mode. Use this feature to set the light up
LIGHT
mode of the remote control.
3
After the configurations, press GSETUP again to
exit from the setup menu.
Note
If you do not complete each of the operations within 30 seconds, this unit
automatically exits from the setup menu.
Setting the backlight mode of the remote
control (LIGHT)
You can set the backlight mode of the remote control.
1
Press GSETUP on the remote control using a
ballpoint pen or similar object.
"SETUP" appears in the display window (4) on the remote
control.
2
Press 9k / n repeatedly to select "LIGHT" and then
press 9ENTER.
"LIGHT" and the current "LIGHT" setting appears in the
display window (4) alternately.
LIGHT
104
En
Descriptions
ON
Current "LIGHT" setting
3
Press 9k / n to select the desired setting.
Choice
ON
OFF
4
Press 9ENTER to confirm the setting.
"OK" appears in the display window (4).
5
Page Press GSETUP again to exit from the setup mode.
–
y
You can light up the backlight by pressing 6LIGHT anytime.
105

Setting remote control codes (P-SET)

104
You can control other components by setting the appropriate remote
106
control codes. Codes can be set up for each control area. For a
complete list of available remote control codes, refer to "List of
108 remote control codes" at the end of this manual.
The following table shows the default component (Library:
109
component category) and the remote control code for each control
area.
109
Remote control code default settings
—
Control area
104
MULTI
V-AUX
PHONO
MD TAPE
BD
HD DVD
DVD
CD
CD-R
CBL
SAT
DTV
DVR
VCR
TUNER
DOCK
NET
USB
(TAPE)
TV
Note
You may not be able to operate your Yamaha component even if a Yamaha remote
control code is preset as listed above. In this case, try setting another Yamaha remote
control code.
Descriptions
Lights up the backlight when a button is pressed
or the remote control detects a motion.
Lights up the backlight only when 6LIGHT is
pressed.
Library
(component
Manufacturer
category)
DVD Yamaha
— —
— —
MD Yamaha
DVD Yamaha
DVD Yamaha
CD Yamaha
CD-R Yamaha
— —
— —
DVR Yamaha
— —
SOURCE Yamaha
SOURCE Yamaha
SOURCE Yamaha
TAPE Yamaha
— —
Default
code
04306
—
—
00409
04306
04306
01105
01405
—
—
00707
—
00012
00012
00012
00311
—