Epson C82362 Administrator's Manual page 97

A dial-up is generated because a connection to the primary
server is attempted periodically. Since this is attributable to
the automatic re-connection function, turn the printer with
the interface card off and on.
When the file server on the local network is down
When there is no file server on the local network, NetWare
cannot be used on the local network. In this case, the NetWare
protocol for the interface card is also not available. No dial-
up is generated under this condition. When the file server on
the local network is restored, the interface card is also
automatically restored.
For local networks with no file server:
Printer
Depending on the router setting, the NetWare protocol can be
used without a file server on the local network. This case also
follows the first five described above.
For local networks with a primary server
Even if a primary server is installed on the local network, an
unnecessary dial-up may be generated depending on the
configuration.
Dial-up
router
Local network
Using the Interface Card with NetWare
Primary file server
(primary print server)
Dial-up
router
Remote network
3
3-47