10. Enter your password (up to 20 characters) and click OK to
save the settings. If you are entering a password for the first
time, click Change and set the password. For more
information about passwords, see "About passwords" on
page 9-7 for EpsonNet WinAssist or "About passwords" on
page 9-16 for EpsonNet MacAssist.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu (for WinAssist), or by quitting MacAssist and then
restarting it (for MacAssist).
c
11. Be sure to print a network status sheet to confirm the new IP
address.
2-16
Setting the IP Address
Caution:
Since it takes 2 or 3 minutes to send new settings to the
interface card, you must wait to turn off your printer after
the on-screen message appears.