Table of Contents
Advertisement
Installing TCP/IP Protocols in Your PC
Before using the interface card with TCP/IP, you must make sure
that the TCP/IP protocol is installed in your operating system.
After it is installed, you can use the computer to configure the
interface card for use with TCP/IP.
If you have already installed the TCP/IP protocol, you can skip
these steps and go to the next section "Setting the IP Address
Using EpsonNet WinAssist/MacAssist" on page 2-12.
Note:
The network administrator must confirm any changes made to the IP
address settings.
2-2
Setting the IP Address
Advertisement
Table of Contents
