TCP/IP menu
You can configure the interface card for TCP/IP by making the
necessary settings on the TCP/IP menu. See Chapter 2 for details.
Items
Get IP address
Set by PING
IP address
Subnet mask
Default gateway
OK
Cancel
Help
Explanations
Select the method for acquiring IP addresses; Auto,
DHCP, BOOTP, RARP, or Manual.
Check this box to enable IP address setting using
the ping command. This check box is available
only when Manual is selected for Get IP address.
Set the IP address for the interface card. Be sure
that the IP address is unique and will not cause
conflicts with any other device on the network.
Set the subnet mask of the IP address.
Set the gateway address.
Updates the settings.
Cancels any changes.
Accesses help.
The EpsonNet Configuration Utility
9
9-9