Epson C82362 Administrator's Manual page 107

3. Click AppleTalk under Network on the Configuration menu
to view the AppleTalk Settings screen.
4
AppleTalk:
Select Enable.
Printer Name:
Enter the printer name (up to 32 characters). The default name
is shown below.
Level 1 printer: Epson-xxxxxx
Level 2 or 3 printer: Printer product name-xxxxxx
(xxxxxx are last 6 digits of the serial number)
Entity Type:
If you are using a Level 1 printer, set the Entity type to match
the driver for the printer with the interface card. The default
is "epson". Click the Entity configuration button to enter the
entity type (up to 32 characters).
If you are using a Level 2 or 3 printer, you do not have to set
this option. The list view displays the printer's Entity type on
an AppleTalk network.
Zone Name:
Enter the network zone (up to 32 characters) in which you
want the printer to appear.
4-9
Using the Interface Card with Macintosh