Epson C82362 Administrator's Manual page 80

Frame type:
Select appropriate frame type from the following: Auto,
Ethernet 802.2, Ethernet 802.3, Ethernet II, or Ethernet
SNAP.
Tree name:
Leave as is.
Context:
Leave as is.
Primary printserver name:
Enter the print server name which you have created using
PCONSOLE or NWADMIN.
Printer port number:
Enter the same port number you assigned to the print server
using PCONSOLE or NWADMIN.
8. After making the settings, click OK.
The Password dialog box appears.
9. Enter your password (up to 20 characters) and click OK to
save settings. If you are entering a password for the first time,
click Change and set the password. For more information
about passwords, see "About passwords" on page 9-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
c
Note:
Since the new settings are sent to the interface card, you must wait
until this message appears before turning off the printer.
3-30
Using the Interface Card with NetWare
Caution:
Since it takes 2 or 3 minutes to send new settings to the
interface card, you must wait until the on-screen message
appears before turning off your printer.