Mode:
Select Printserver/bindery.
Frame type:
Select the appropriate frame type from the following: Auto,
Ethernet 802.2, Ethernet 802.3, Ethernet II, or Ethernet
SNAP.
3
Tree name:
Leave as is.
Context:
Leave as is.
Primary fileserver name:
Select the file server which the print server logs in.
Printserver name:
Select the print server. You can also create a new print server
by typing a name (up to 47 characters).
Printserver password:
Enter a password up to 20 characters long to be used when
the interface card logs in to the print server. If you need to set
a password, see the NetWare documentation for details.
Usually you do not need to set a password.
Re-input password:
Enter the password again.
Polling interval:
Set the polling time from 5 to 90 seconds. If you need to set
the polling interval, see the NetWare documentation for
details. Usually you do not need to set the polling interval.
3-7
Using the Interface Card with NetWare