Canon LBP3310 User Manual page 381

Bi-directional communication has a problem.
8
Cause
Remedy
NOTE
Specify the setting for bi-directional communication using the following procedure.
1.
8-50 When Data Is Not Sent to the Printer
3.
Display the [Ports] sheet
b
properly .
a
• If the appropriate port is not selected
Select the appropriate one, then click [OK].
• If you cannot find the port to be used
Uninstall the printer driver and install it again. (See "Uninstalling the Printer Driver," on p.
4-67, "Installing the Printer Driver," on p. 4-4)
Bi-directional communication is not enabled.
Perform the following procedure.
1.
Enable bi-directional communication.
2.
Restart the computer.
3.
Restart the printer (Turn OFF the printer once, wait for 10 seconds or longer, and then
turn it ON.).
Display the [Printers and Faxes] folder or the [Printers] folder.
W 2000
indows
From the [Start] menu, select [Settings] ➞ [Printers].
W XP P
indows rofessional
From the [Start] menu, select [Printers and Faxes].
W XP H E
indows ome dition
From the [Start] menu, select [Control Panel], and then click [Printers and Other Hardware]
➞ [Printers and Faxes].
a
, then make sure that the port to be used is selected
b
W S 2003
indows erver