Canon LBP3310 User Manual page 363

The front or back of the printed paper has smudge marks.
Cause
Remedy
A portion of a page is not printed.
Cause 1
Remedy 1 Perform the following procedure in the printer driver.
Remedy 2 Perform the following procedure in the printer driver.
Cause 2
Remedy
Cause 3
8
Remedy 1 Data cannot be printed within 5 mm margins (10 mm for envelopes and Index
Remedy 2 Perform the following procedure in the printer driver.
IMPORTANT
The edges of the printout may be partly missing depending on the property of the
document to be printed.
The printing position is skewed.
Cause 1
Remedy
8-32 Print Quality Problems
The fixing roller is dirty.
Clean the fixing roller. (See "Cleaning the Fixing Roller," on p. 7-18)
The scale factor is incorrect.
1.
Display the [Page Setup] sheet.
2.
Clear the [Manual Scaling] check box.
If the check box for this option is cleared, the scale factor will be set according to
[Page Size] and [Output Size] automatically.
1.
Display the [Page Setup] sheet.
2.
Select the [Manual Scaling] check box, then specify an appropriate scale factor
according to the paper size to be used.
The position of the paper is incorrect.
Load the paper properly. (See "Loading Paper in the Paper Cassette," on p.
3-17, "Loading Paper in the Multi-purpose Tray," on p. 3-31)
A document with no margins was printed.
Card) on all sides of the paper. Ensure margins around the data.
1.
Display the [Finishing] sheet.
2.
Click [Finishing Details].
3.
Select the [Print with Upper Left of Sheet as Starting Point] check box.
[Gutter] is specified.
Perform the following procedure in the printer driver.
1.
Display the [Finishing] sheet.
2.
Click [Gutter].
3.
Set [Gutter] to "0".