Canon LBP3310 User Manual page 364

Cause 2 "Top Margin" and "Paper Position" in the application are not specified
properly.
Remedy Specify the settings for "Top Margin" and "Paper Position" in the application
properly.(See the instruction manual supplied with the application)
The next page is printed from halfway across the previous page.
Cause "Line Spacing" or "Lines/Page" in the application is not specified
properly.
Remedy Specify the settings for "Line Spacing" and "Lines/Page" in the application so
that data fits in one page.(See the instruction manual supplied with the
application)
Nothing is printed on the paper.
Cause 1 The toner cartridge was installed with the sealing tape still attached.
Remedy Take the toner cartridge out of the printer, pull out the sealing tape, and reinstall
the toner cartridge. (See "Replacing the Toner Cartridge," on p. 7-2)
Cause 2 Multiple sheets of paper were fed at a time.
Remedy Align the paper stack properly and load it again. If you are using transparencies
or labels, fan them thoroughly and load them again. (See "Loading Paper in the
Paper Cassette," on p. 3-17, "Loading Paper in the Multi-purpose Tray," on p.
3-31)
The overall surface of the paper is printed in black completely.
Cause The drum in the toner cartridge has deteriorated.
Remedy Replace the toner cartridge with a new one. (See "Replacing the Toner
Cartridge," on p. 7-2)
Colored lines and text come out faint.
Cause Thin lines or text are being used.
Remedy Perform the following procedure in the printer driver.
1.
Display the [Quality] sheet.
2.
Click [Details].
3.
Select the [Print Colored Text and Lines in Black] check box.
Print Quality Problems
8
8-33