Canon RE-350 Control Interface Commands Manual page 52

Name of the Equipment
• Function:
Gets the code name of the equipment which is connected to the PC.
The code name of the
RE-350
• Timing of the "C-response Packet" sent to the PC:
Right after this command is received by the
• The parameter of the "C-response Packet":
MSH: fixed LSH: fixed
The code name of the
RE-350
• The maximum operation time (msec):
100 millisecond
• Command format:
Header ID number
$10
Version of ROM
• Function:
Gets the coded version number from each of the
• Timing of the "C-response Packet" sent to the PC:
Right after this command is received by the RE-350.
• The parameter of the "C-response Packet":
MSH: $XX LSH: $XX
The parameter is the
MSH
The parameter is the
LSH
The above parameters (in
• The maximum operation time (msec):
100 millisecond
• Command format:
Header ID number
$10
is " ".
R1
.
RE-350
is " ".
R1
Command
$ 8 * $ 8 8
RE-350
version of the
ROM RE-350
version of the
ROM RE-350
Code) are variable and are set by the firmware.
ASCII
Command
$ 8 * $ 8 8
Parameter MSH
$ 0 0
's 's.
ROM
's camera head .
CPU
's main body .
CPU
Parameter MSH
$ 0 1
Parameter LSH
$ 0 0
Parameter LSH
$ 0 0
52