Negative/Positive - Canon RE-350 Control Interface Commands Manual

3.6 Positive/Negative Commands
†
Set Positive Mode
• Function:
Sets the video output to normal (positive). (Also, the Auto-White Balance will be adjusted once.)
• Timing of the "C-response Packet" sent to the PC:
Right after this setting is done.
• The parameter of the "C-response Packet":
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header ID number
$10
Set Negative Mode †
• Function:
Sets the video output to negative. (Also, the Auto-White Balance will be adjusted once.)
• Timing of the "C-response Packet" sent to the PC:
Right after this setting is done.
• The parameter of the "C-response Packet":
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header ID number
$10
†
The responds in
RE-350
be still working on the
AWB
Command
$ 8 * $ 3 8
Command
$ 8 * $ 38
msec with a C-response data packet after the reception of this command, but it will
500
adjustment. (The real
Parameter MSH Parameter LSH
$ 0 0
Parameter MSH Parameter LSH
$ 0 1
operation time will be longer than
AWB
$ 0 0
$ 0 0
msec.)
500
36