The Default Setting Of Each Function; Meaning Of Each Led Status - Canon RE-350 Control Interface Commands Manual

1.4 The Default Setting of Each Function After Power-On
Function
Communication mode
Input signal selection
Nega/Posi
White Balance
Color / B&W
Focus
Zoom
Document lights
Back light
Electronic shutter speed
Communication speed
ID number
1.5 The Meaning of Each LED Status
LED
Status
RS-232
INPUT SELECT
NEGA
WHITE BALANCE
AUTO
B/W
FOCUS AUTO
LIGHTS
BACKLIGHT
[O -L ] Mode
FF INE
Document Camera
Positive
Locked at the proper white balance
Color
Stopped at the maximum focus point
Stopped
Off
Off
Depends upon the setting of the digital switches
Depends upon the setting of the digital switches
Depends upon the setting of the digital switches
on Communication mode is [O
off Communication mode is [O
blink Communication mode is transferring.
on External Video signal is selected.
off Document camera signal is selected.
blink
N.A.
on Negative video signal is output.
off Normal video signal is output.
blink
N.A.
on The auto-white balance was adjusted successfully.
off The auto-white balance could not be adjusted.
blink Auto-white balance is being adjusted.
on Output video signal is black and white.
off Output video signal is color.
blink
N.A.
on Auto focusing was done successfully.
off Auto focusing failed or is in manual focusing mode.
blink Auto focus is being adjusted.
on Document Lights are on.
off Document Lights are off.
blink Document lights are being preheated.
on Backlight is on.
off Backlight is off.
blink
N.A.
Default Setting
Meaning
-L ] or [N
N INE OTIFICATION
-L ] Mode.
FF INE
] Mode.
3 Hz
3 Hz
3 Hz
3 Hz
14