Data Packet Configuration; Control Command Packet" Format; C-Response Data Packet" Format; Event Data Packet" Format - Canon RE-350 Control Interface Commands Manual

1.8 Data Packet Configuration

Control Command Packet Format (PC —> RE-350)
The can request an operation from the
PC
Header ID number
10h
C-Response Data Packet Format (PC <— RE-350)
The can determine whether the
PC
failed to perform the operation command given to it by the
Header ID number
A0h
Event Data Packet Format (PC <— RE-350)
When the 's {
RE-350 RS-232
Header ID number
20h
E-Response Data Packet Format (PC —> RE-350)
When the receives the "Event Data Packet" from the
PC
with this data packet.
RE-350
Header ID number
B0h
FP Data Packet Format (PC <— RE-350)
In [N ] Mode, the
OTIFICATION
packet.
Header ID number
30h
using this command.
RE-350
Command number
* *h * *h
could perform and finish an operation command given to it by the
RE-350
Response number
* *h * *h
} button is pushed, the
RE-350
Event number
* *h * *h
Response number
* *h * *h
can notify the
RE-350 PC
FP data number
* *h * *h
Parameter
MSH
.
PC
Parameter
MSH
will send this packet to the
Parameter
MSH
, the should respond to the
RE-350 PC
Parameter
MSH
of the condition of each button and
Parameter
MSH
LSH
PC
LSH
.
PC
LSH
LSH
using this data
LED
LSH
or
16