Canon RE-350 Control Interface Commands Manual page 44

LED: Blink
• Function:
The indicated by the parameter data will be made to blink. This command is available in the [N
LED
Mode. If the receives this command from the
RE-350
Packet" with the Mode Error response.
• The available parameter value:
LSH: $00 ~ $FF
• Timing of the "C-response Packet" sent to the PC:
Right after this setting is done.
• The parameter of the "C-response Packet":
$0000 fixed
• The maximum operation time (msec):
500 millisecond
• Command format:
Header ID number
$10
• The bit assignment for the parameter data:
Each bit corresponds to each
D15 D14
RS-232 Input select
Command
$ 8 * $ 6 B
on the operation panel.
LED
D13 D12
NEGA W/B Auto
in another mode, the
PC RE-350
Parameter MSH Parameter LSH
$ * *
D11 D10
B/W Focus Auto
OTIFICATION
will send a "C-response
$ 0 0
D9 D8
Lights Backlight
]
44