Completing The Parts Replacement - Lenovo 098118U Installation And User Manual

7. Carefully pull on the tips of the rubber mounts until the new rear fan assembly
Figure 32. Installing the rear fan assembly
8. Connect the new rear fan assembly cable to the system fan connector on the

Completing the parts replacement

After completing the installation or replacement for all parts, you need to reinstall
the server cover and reconnect cables.
To reinstall the server cover and reconnect cables to your server, do the following:
1. Make sure that all components have been reassembled correctly and that no
2. If you have removed the front bezel, reinstall it. See "Removing and reinstalling
3. Make sure that the cables are routed correctly before reinstalling the server
44
Installation and User Guide
is secured in place.
system board. See "System-board internal connectors" on page 14.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the replacement, go to "Completing the parts replacement."
tools or loose screws are left inside your server. See "Internal components" on
page 15 for the locations of various components in your server.
the front bezel" on page 19.
cover. Keep cables clear of the hinges and sides of the server chassis to avoid