Table of Contents
Advertisement
9. Align the hard disk drive cage pivot pin with the slot 1 in the upper drive
cage, as shown in Figure 28. Then, slide the hard disk drive cage into the
chassis.
10. Press down on the metal latch 2 and pivot the hard disk drive cage into
place. Then, slide the drive cage to the front of the server until it snaps into
position.
Note: There are two arrows, one on the upper drive cage and one on the hard
disk drive cage. The arrows are aligned when the hard disk drive is in the
proper position.
Figure 28. Installing the primary hard disk drive
Chapter 5. Installing or replacing customer replaceable units
39
Advertisement
Table of Contents
