Notation - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications
3.5.1
Normally it is less than 1000ms for the completion of receiving a command and returning the
response, but it takes more than 1000ms for some Functional Execution Commands (CF
commands) as listed below:
Command
CF_IMAGE
CF_INPUT
CF_SCREEN
CF_SYSTEM
It takes about 8 seconds for the internal initialization after plugging in AC power. During this time
commands cannot be processed. Do not issue any command.
4.

Notation


Data from a controller to a projector is represented as COMMAND, and responded data from a
projector to a controller against the incoming command is represented as RESPONSE.

[CR]: Carriage Return Code
The command ends with carriage return code.
The response also ends with carriage return code.

_: Space Code
All space code is indicated by (_).

%1: Parameter included in command.
When there is more than one parameter, they are represented as %2, %3...
Item
Select Image Mode
Select Input
Select Screen Size
Select System
8 / 42