Other Command; Cf_Keyenu Command; Cf_Freeze Command; Cf_Vmute Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications
8.11

Other Command

8.11.1 CF_KEYENU Command

Command "CF_KEYENU_%1"[CR]
"RIGHT" ------------------------- Shift Pointer on OSD Menu to right
"LEFT" --------------------------- Shift Pointer on OSD Menu to left
%1 "UP" ------------------------------ Shift Pointer on OSD Menu to right
"DN" ------------------------------ Shift Pointer on OSD Menu to right
"AUTOPC" ---------------------- Execute Auto PC adj
This command behaves the same as corresponding keys of the remote control
Details Auto PC adj. keeps operating even though projector receives this command again
while Auto PC adj. is in process.
Acceptable
Response
Unacceptable

8.11.2 CF_FREEZE Command

Command "CF_FREEZE_%1"[CR]
"ON" ------------------------ Set Freeze to ON
%1
"OFF" ----------------------- Set Freeze to OFF
Set/Cancel Freeze setting. (Valid only in the normal Power ON status)
Although projector returns "000", receiving another Freeze command does not
Details
release Freeze operation.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.11.3 CF_VMUTE Command

Command "CF_VMUTE_%1"[CR]
"ON" --------------------------- Set No show ON
%1
"OFF" ------------------------- Set No show OFF
Details Set/Cancel AV-MUTE. (Valid only in the normal Power ON status)
Acceptable
Response
Unacceptable

8.11.4 CF_POWER Command

Command "CF_POWER_%1"[CR]
"ON" ------------Power ON projector
"OFF" ---------- Power OFF Projector
%1
Note1) This command terminates the start-up countdown.
Details Power ON / OFF projector.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
28 / 42