Setting Command; Cf_Lang Command; Cf_Menupoisition Command; Cf_Inputsearch Command - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications
8.10

Setting Command

8.10.1 CF_LANG Command

Command "CF_LANG_%1" [CR]
"ENG" -------------------------- Select ENGLISH
"DEU" -------------------------- Select German
"FRA" --------------------------- Select French
"ITA" ---------------------------- Select Italian
"ESP" --------------------------- Select Spanish
"POR" --------------------------- Select Portuguese
"POL" --------------------------- Select Pohland
"SVE" --------------------------- Select Swedish
%1 "NOR" --------------------------- Select Norway
"GRE" --------------------------- Select Greece
"CHI" --------------------------- Select Chinese
"JPN" --------------------------- Select Japanese
"KOR" --------------------------- Select Korea
"RUS" --------------------------- Select Russia
"HUN" --------------------------- Select Hungarian
"CZE" --------------------------- Select Czech
"TUR" --------------------------- Select Turkish
Select language for OSD. (Valid only when in the normal Power ON status.)
The language set by this command is stored in EEPROM and the setting
Details
remains after the power is ALL OFF.
No display is shown when projector received this command..
Acceptable
Correspondence
Unacceptable

8.10.2 CF_MENUPOISITION Command

Command "CF_MENUPOSITION_%1" [CR]
"TOPLEFT" ------------------ Move the menu display to top-left
"TOPRIGHT" ---------------- Move the menu display to top-right
%1 "CENTER" ------------------- Move the menu display to center
"BTMLEFT" ------------------ Move the menu display to bottom-left
"BTMRIGHT" ---------------- Move the menu display to bottom-right
Change the menu position
This command is available in normal Power ON status.
Details
The status set with this command is stored in EEPROM and its setting is
effective after ALL is OFF.
Acceptable
Correspondence
Unacceptable

8.10.3 CF_INPUTSEARCH Command

Command "CF_INPUTSEARCH_%1"[CR]
"OFF" ------------------------- Set Input search operation OFF
%1
"ON" --------------------------- Set Input search operation ON
Set Input search operation mode.
(Valid only in the normal Power ON status.)
Details The status set by this command is stored in EEPROM and its setting is
effective after ALL is OFF.
No display is shown when projector received this command.
Acceptable
Correspondence
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
24 / 42