PDG-DSU30 Expand Serial Command Functional Specifications
1ÿ
Overview
0û
This Functional Specification defines communication with PDG- DSU30.
0û
Commands are designed to Network communication, but most commands are also available to
remote-control a projector through RS-232C from a computer. Therefore, commands are defined as
Expand Serial Commands.
2ÿ
Serial Interface Specification
2.1 Transfer Specification
Items
Synchronous System
Transmission Speed
Data Length
Parity
Stop Bit
Flow Control
1) Transmission Speed: Initial setting value is 9600.
2.2 Connection
Use the dedicated serial cables for the connection between a computer and the projector.
Connect COM port of the computer to SERIAL PORT IN of the projector.
COM Port (COM1 or COM2) of a computer is specified by the control software of the computer.
Asynchronous
9600
8 bit
N/A
1
N/A
Projector
Serial Port IN
3Pin Cable of Dsub
Pin No
Name
Connect Pin No
1 TXD
2 RXD
3 GND
shieldingshielding
6 / 42
Specification
PC
COM 1
9Pin Cable of Dsub
Name
2 RXD
3 TXD
5 GND
shieldingshielding