Status Read Command; Format; Transfer Example; Operation Condition - Sanyo PDG-DSU30 - 2500 Specifications

PDG-DSU30 Expand Serial Command Functional Specifications
9

Status Read Command

9.1 Format

1) PC issues a command in the format below:
"CR_Command" [CR]
Command: String
2) When the projector receives the applicable command, it returns the required information
as a data string.
"000_" %1 [CR]
%1: required Information (a data string. Refer to [Basic Status Read Command Table])
3) When the received data cannot be decoded, the projector returns "?" [CR]

9.2 Transfer Example

Getting total dots of the projector by Expand Serial Commands
PC → PJ: "CR_TDOTS" [CR]
PC ← PJ: "000_%1344" [CR]

9.3 Operation Condition

Basically Status Read Commands should be always operated.
29 / 42