Step4 Camera Installation; Setting At Upright Position - Canon Vb-C60 - Ptz Network Camera Start Manual

Step4 Camera Installation

Before Installation
Be sure to set the IP address (
● If 20 minutes or more pass after the camera is turned on, the camera stops sending
requests for IP address allocation and it cannot detect the IP address using VB
Note
Initial Setting Tool. Therefore, specify the IP address and confirm the camera
operation before setting up the camera as directed in "Initial Setting" (→ P.2-9).
● The MAC address is printed on the bottom of the camera (→ P.1-14). Please make
a note before installing the camera.
● When holding a camera, hold it with the head arm but not the camera head.
● The camera should not be installed in locations subject to direct sunlight, high
temperatures, high humidity, or other adverse conditions (→ P.xiii).

Setting at Upright Position

The video image position of VB-C60 is set on the assumption that the camera is
mounted on the ceiling. To invert the video image, change the "Mount" setting in
Note
"Camera" in the setting page (→ dOperation Guide P.1-17).
Placing at a Flat Location
Attach Rubber Feet to the camera.
2-14
→
P.2-10) before installing the camera.
Place the camera on a flat and stable place.