Canon Vb-C60 - Ptz Network Camera Start Manual page 47

3. A viewer starts up and displays the
video image from the camera
● A user authentication window appears after clicking "Setting Page" or "Admin Viewer"
in camera's top page.
Note
The factory default user name and password are as follows:
User name: root
from Setting Page
● For security reasons, you should change the administrator password (→
dOperation Guide P.1-7).
● You need to install VK Viewer (→ P.1-6) to view both JPEG and MPEG-4 video.
● In the factory default settings, no restrictions apply to the distribution destination
for video images. When you use a camera for surveillance purpose, you should
always specify the destination in "Access Control" in the setting page (→
dOperation Guide P.1-35).
● Refer to the Operation Guide for information on how to use the VB-C60 Viewer.
● Various settings are available in "setting page" (→ dOperation Guide P.1-4).
Tip
Password: VB-C60
Viewing image is now complete.
Step3 Initial Setting
from Admin Viewer
2-13