Step4 Camera Installation
9. Mount the dome
Align the (o) mark on the dome with the (|) mark on the In-Ceiling Bracket, and then rotate the
dome clockwise to the (|) mark so that the screw hole for mounting is in the correct position.
1
10. Fix the dome with a screw to prevent the dome from rotating
11. After mounting the dome, reboot the camera to initialize the camera position
(→ dOperation Guide P.1-44).
If the LED is turned on, the light may be reflected by the dome and captured by the
camera. In this case, change the LED setting to "Turn Off" (→dOperation Guide
Tip
P.1-17).
2-22
2
Installation is now complete.