Canon Vb-C60 - Ptz Network Camera Start Manual page 19

Image Stabilizer
Image Stabilizer effectively works to compensate for image blur caused by shaking of cameras
mounted on the ceiling, a pole or other places with vibration.
* Image Stabilizer cannot correct image blur caused by instantaneous shake or vibration that
exceeds a certain level. While Image Stabilizer is being activated, the image quality declines
and the angle of view becomes narrower.
Motion Detection
VB-C60 is capable of uploading images, notifying via e-mail and playing audio by detecting changes
in video caused by subject's movement.
Upload and E-mail Notification
With a motion detection event or an external device input event as a trigger, VB-C60 uploads
images, which was buffered in the camera, to a specified destination via FTP, HTTP or SMTP (e-
mail), as well as notifies events using HTTP or SMTP (e-mail).
Panorama Image Creation
The entire area covered by the camera can be registered in the viewer as a panorama image and
then used for camera control. Preset ranges can then easily be set visually using a registered
panorama image.
Install-Less VB-C60 Viewer
Since VB-C60 is equipped with built-in VB-C60 Viewer, you don't need to install any viewer
application. Three user authority levels are available: Administrator, Authorized Users and Guest
Users.
Two-Way Audio (Full Duplex)
You can send and receive audio (full duplex) via viewers by connecting the camera with an
amplifier microphone or a speaker with amplifier*. Both LINE IN and MIC IN are available for
audio input, which can be switched in the setting page.
* Microphones and speakers are sold separately.
Upright Position and Ceiling-Mounted Position
VB-C60 can be placed in an upright position or mounted on the ceiling by simply changing the
setting (→ dOperation Guide P.1-17).
* The camera should not be installed in locations subject to direct sunlight, high temperatures,
high humidity, or other adverse conditions (→ P.xiii).
For ceiling mounted installation, an optional Indoor Dome Housing or Ceiling Mount Cover is
available (→ P.1-15).
PoE
PoE allows the use of a single LAN cable connected to a PoE* HUB (→ P.xv) to both power the
camera and transfer video and audio data. There is no need of additional electrical constructions
once you connect the camera to a PoE HUB.
* PoE stands for Power over Ethernet, which is compliant with the IEEE 802.3af standard by the
Institute of Electrical and Electronic Engineers. Maximum length of LAN cable to connect the
camera and the PoE HUB is 100 m (→ P.xv).
Features
1-3