Launch Vk Viewer And Display The [Configuration And Preferences] Screen; How To Launch Vk-64/Vk-16 - Canon VB-C300 Administrator's Manual

Launch VK Viewer and Display the [Configuration and
Preferences] Screen

How to Launch VK-64/VK-16

Double-click the [VK Viewer v2.2] desktop icon.
Alternatively, from the Windows [Start] menu select: [All Programs] > [WebView Livescope] > [Network Video
Recorder VK Series v2.2] > [VK Viewer v2.2].
The connect option menu (Start-up Screen) for Storage Server is displayed. Select [Master Storage Server]
option and click [Connect].
Start-up Screen
Note
If you want to add a Storage Server to the connect option menu, login the desired Storage Server by
specifying its IP address and click [Add Storage Server] in the [Viewer Settings] window (
Tip
If multiple Storage Servers are being used, you can setup one of them as the Master Storage Server.
If the Storage Servers v1.2, v1.3, v1.4, v2.0, v2.1 or v2.2 coexist in the system, either Storage Server can
be specified as the Master Storage Server.
Older viewer than Viewer 2.2 cannot connect to the Storage Server v2.2.
If you want to connect to the Storage Server directly without displaying Start-up Screen, uncheck [Select
a Master Storage Server when starting] in the [Viewer Settings] window (
[localhost]
Connects to Storage Server and starts the
Viewer. Select this option to use the local PC
where Viewer is installed as the Master
Storage Server.
[Use IP address]
Connects to Storage Server and starts the
Viewer by specifying its IP address. Select
this option when the Storage Server and the
Viewer are installed on separate PCs.
[Not use Storage Server]
Select this option to use the Viewer only
without connecting to a Storage Server.
P. 5-14).
P. 5-14).
4-3