Canon VB-C300 Administrator's Manual page 128

Set Motion Detection Recording
Step 2: Set Motion Detection Options
Set the following options on the [Motion Detection Settings] dialog.
1. In the [Detect Motion Using] menu, select one of the following:
[Storage Server]
Obtains video from the Camera Server and detects motion with the Storage Server.
[Camera Server]
Uses the Motion Detection function of the Camera Server to detect motion (This menu is only active for
VB150 servers with the [Video Input] set to [Single] or VB-C500VD, VB-C500D, VB-C60, VB-C50i/VB-C50iR,
VB-C50FSi, VB-C50Fi).
2. In the [Analysis Frame Rate] menu, select from 0.1 to 30 frames per second.
If you select the [Camera Sever] to detect motion, [Settings] becomes available. [Settings] is now enabled.
Click to launch your VB Admin Motion Detection Setting Tool. Install the VB Admin Tools that is bundled with the
VB-C500VD, VB-C500D, VB-C60, VB-C50i/VB-C50iR, VB-C50FSi, and VB-C50Fi in advance. See the Camera
Server's User's Manual for how to configure the motion detection settings.
Note
To use the Motion Detection function of the VB-C50i/VB-C50iR, VB-C50FSi and VB-C50Fi, it is necessary
to configure schedules from the VB Admin Schedule Setting Tool.
Setting motion detection at the Storage Server causes high CPU load. It is strongly recommended to set
motion detection at the Camera Server whenever it has the motion detection function.
[Detect Motion Using] cannot be set to [Storage Server] when the [Resolution] is set to [MPEG-4].
To configure motion detection settings on the camera server side in VB-C500VD/VB-C500D, VB-C60,
please install VB Admin Tools Ver 5.1.
4-48