Restoration Procedure; Restore Data From Backup For Data Protection - Canon VB-C300 Administrator's Manual

Restoration Procedure

Restore Data from Backup for Data Protection

The following explains how to reconstruct the Storage Server for the VK-64/VK-16 for maintenance or recovery
from a failure.
1. Check that the PC hardware environment has been restored to the former state. Be sure to use the same
folder organization as before.
2. Install the VK-64/VK-16.
3. After installation completes, stop the Storage Server from the [Storage Server Configuration] window.
4. Restore the VK-64/VK-16's configuration file to the former location.
The default location is as follows:
Configuration file path for OS other than Windows Vista/Windows Server 2008
<System Drive>:\Documents and Settings\All Users\Application Data\Canon\WebView\NVR\
Configuration file path for Windows Vista/Windows Server 2008
<System Drive>:\ProgramData\Canon\WebView\NVR\
5. Restore the recorded video data file to the former location.
The default location is as follows:
<Save video in>:\WebView-NVR\videofiles
6. Restore the event data file to the former location.
The default location is as follows:
<Save video in>:\WebView-NVR\eventfiles
7. Start the Storage Server from the [Storage Server Configuration] window.
8. Check that the recording operation is performed correctly. Also check that restored video data is played back
correctly.
Note
If the [Maximum retained history] setting is used in the [Storage Server Configuration] window and the
restored video data contains data exceeding the retaining period, that data will be deleted when the
Storage Server starts.
7-11