Messages List; Operation Messages And Error Messages - Canon VB-C300 Administrator's Manual

Messages List

Operation Messages and Error Messages

Error messages and operation messages displayed during normal recording and operation of VK-64/VK-16 are
shown below.
Video Windows Error Messages
Connecting to camera.
Could not connect to camera.
Getting camera control.
Can't get camera control.
Control will be lost in '<count down>'
seconds.
Video window
Camera control lost.
No recorded video.
Can't connect to storage server.
Not set up to record.
Please wait
9-10
Messages Cause
The viewer is in the process of connecting
to the camera.
The viewer cannot connect to the camera
server and the live video cannot be
displayed.
The message is displayed before starting
camera control after sending a camera
control request.
Another user with higher user authority has
already been controlling the camera when
you sent a camera control request.
If the camera is left uncontrolled for 30
seconds, this message is displayed and a
countdown starts. It counts down starting
from 10 to 0 by 1 second.
Time out occurred while the viewer is
controlling the camera or a camera control
request was sent from another user with
higher user authority. This message will
close in three seconds.
No recorded video exists during the time
where the Playhead is positioned now,
when playing recorded video.
It is unable to connect to the storage server
to play recorded video.
You attempted to play recorded video with
the camera set to [Do not Record]
It may take time until the MPEG-4 live/
recorded video is displayed. This message
will close in several seconds.