Canon VB-C300 Administrator's Manual page 59

[User Management] Tab
In the [Storage Server Configuration] dialog, [User Management] tab allows you to set up users and their
privileges.
[User Management] tab allows you to configure the following privileges:
• Administrator
• Not Administrator (Operator)
Administrator has access to the Viewer including Camera Server setup, recording schedules and Viewer
setup.
Users who have Operator Status cannot configure, register and change Camera Servers, or configure and
change recording schedules.
By default, a user called "admin" is created. The password is "NVR". It is strongly recommended that this should
be changed after installation.
It is necessary to set up users on all Storage Servers. A particular user should be set up to have the same
password on each Storage Server.
Check to enable user to have Administrator privileges
(full access to configuration functions).
Use [Add] to add users to this field.
There is no limit to the number of users you can add.
Check [Require authentication when starting this tool] box
if needed.
Click [Apply] to save changes.
[Storage Server Configuration] Dialog
3-7