OLIGHT Arkfeld Ultra Manual

In the Box

Specifications

Table 1:
WHITE LIGHT: MAX 9W
UV LIGHT: MAX 1.8W
LASER: MAX 0.08W

*Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.

LASER RADIATION - AVOID DIRECT EYE EXPOSURE
MAX. OUTPUT: 5mW
WAVELENGTH: 510~530nm
COMPLY WITH 21 CFR 1040.10 AND 1040.11
CLASS IIIa LASER PRODUCT

LASER 3R
IEC 60825 - 1:2014
WAVELENGTH: 510nm~530nm PEAK POWER < 5mW

Max Output: 5mW @510nm~530nm Wavelength

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight's labs for reference.

Table 2:
MCC

Lock/unlock

See Figure 1;
When the light is off, press and hold the button (about 2 seconds) until you see moonlight mode, the laser (Laser mode), or UV light (UV mode) turn on and then quickly off, the flashlight has then been locked out. When the light is locked, press and hold the button (about 1 second) until the flashlight activates moonlight mode, the laser, or UV light, the flashlight will then be unlocked.

Charging

see Figure 2

The selector switch mode

see Figure 3;
Rotate the selector clockwise to select white light mode; rotate the selector counterclockwise to switch to UV mode; stop in the middle to switch to laser mode.

Instructions for center button operation in white light mode

1. Turn on/off the flashlight, see Figure 4;
   Single press the button to turn on and off.
   
2. Moonlight, see Figure 5;
   Press and hold for 1s when the light is off, the light will enter moonlight mode.
   
3. TURBO, see Figure 6;
   Press the switch three times or more continuously to turn on Turbo.
   
4. Strobe, see Figure 7;
   In white light mode, quickly double press the switch to turn on Strobe.
   
5. Change brightness level, see Figure 8;
   While the flashlight is on, press and hold the button to cycle through the brightness levels. The order of brightness is low, medium, then high.
   
6. Timed shutdown, see Figure 9;
   When the light is on, double press and hold the switch to access the timer settings. A single blink accesses the short timer while two blinks accesses the long timer. The light will automatically turn off when the timer runs its course.
   

Instructions for center button operation in laser mode

1. Turn on/off the laser, see Figure 10
   Single press the button to turn on/off the laser.
   
2. When the laser is on, turn on the high brightness white light, see Figure 11;
   With the laser on, double press the center button to activate white light high level.

Figure 11

3. When the laser is on, turn off the white light, see Figure 12;
   When the laser and white light are on at the same time, double press to turn off the white light, the laser will continue to illuminate;
   
4. When the laser and white light are turned on at the same time, change the brightness of the white light, see Figure 13;
   When the laser and white light are on at the same time, press and hold the button to cycle through the brightness levels. The order of brightness is low, medium, then high.
   

Turning on/off in UV mode

See Figure 14;
Single press the button to turn on or off the UV light;

Battery level indicator display

See Figure 15
* One red indicator (10%)

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download OLIGHT Arkfeld Ultra Manual