OLIGHT Arkfeld Pro Manual

IN THE BOX

Specifications

COOL WHITE - CCT: 5700~6700K CRI:70

NEUTRAL WHITE - CCT: 4000~5000K CRI:70

(L)120*(W)27*(H)16mm
(L)4.72*(W)1.06*(H)0.63in

Lithium Polymer Battery1500mAh 3.7V (5.55Wh)

*Max Output: 0.39mW (Class 1)
Max Runtime: 174h
Wavelength: 510~530nm

Max Output: 5mW (Class 3R)
Max Runtime: 61h
Wavelength: 510~530nm

Max Output: 5mW @510nm~530nm Wavelength

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight's labs for reference.

Table 2: MCC

Lock/Unlock

Figure 1 Lock/Unlock

Charging

Figure 2 Charging

Selector - Switch Mode

Figure 3 Selector - Switch Mode

OPERATE IN WHITE LIGHT MODE

ON/OFF

Figure 4 ON/OFF

Moonlight

Figure 5 Moonlight

Turbo

Figure 6 Turbo

Strobe

Figure 7 Strobe

Change Brightness Level

Figure 8 Change Brightness Level

Timed shutdown

Figure 9 Timed shutdown

OPERATE IN LASER MODE

ON/ OFF

Figure 10 ON/ OFF

Turn on the white light while the laser on

Figure 11 Turn on the white light while the laser on

Turn off the white light while the laser on

Figure 12 Turn off the white light while the laser on

When the laser and white light are turned on at the same time, change the brightness of the white light

Figure 13 When the laser and white light are turned on at the same time, change the brightness of the white light

OPERATE IN UV MODE

ON/ OFF

Figure 14 ON/ OFF

Battery Level Indicator Display

Figure 15 Battery Level Indicator Display

* One red indicator (

Operation List

1. Please refer to Table 1 and Table 2 for product specifications;
2. Lock/unlock, see Figure 1;
   When the light is off, press and hold the button (about 2 seconds) until you see moonlight mode, the laser (Laser mode), or UV light (UV mode) turn on and then quickly off, the flashlight has then been locked out. When the light is locked, press and hold the button (about 1 second) until the flashlight activates moonlight mode, the laser, or UV light, the flashlight will then be unlocked.
3. Charging, see Figure 2;
4. The selector switch mode, see Figure 3;
   Rotate the selector clockwise to select white light mode; rotate the selector counterclockwise to switch to UV mode; stop in the middle to switch to laser mode.
5. In the white light mode, the center button operation guide:
   1. Turn on/off the flashlight, see Figure 4;
      Single press the button to turn on and off.
   2. Moonlight, see Figure 5;
      Press and hold for 1s when the light is off, the light will enter moonlight mode.
   3. TURBO, see Figure 6;
      Press the switch three times or more continuously to turn on Turbo.
   4. Strobe, see Figure 7;
      In white light mode, quickly double press the switch to turn on Strobe.
   5. Change brightness level, see Figure 8;
      While the flashlight is on, press and hold the button to cycle through the brightness levels. The order of brightness is low, medium, then high.
   6. Timed shutdown, see Figure 9;
      When the light is on, double press and hold the switch to access the timer settings. A single blink accesses the short timer while two blinks accesses the long timer. The light will automatically turn off when the timer runs its course.
6. Instructions for center button operation in laser mode:
   1. Turn on/off the laser, see Figure 10;
      Single press the button to turn on/off the laser.
   2. When the laser is on, turn on the high brightness white light, see Figure 11;
      With the laser on, double press the center button to activate white light high level.
   3. When the laser is on, turn off the white light, see Figure 12;
      When the laser and white light are on at the same time, double press to turn off the white light, the laser will continue to illuminate;
   4. When the laser and white light are turned on at the same time, change the brightness of the white light, see Figure 13;
      When the laser and white light are on at the same time, press and hold the button to cycle through the brightness levels. The order of brightness is low, medium, then high.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download OLIGHT Arkfeld Pro Manual