OLIGHT S1 BATON - 500 Lumen LED Flashlight Manual

Inside the box

S1 Baton, lanyard, manual (this manual)

Specifications

Material: A6061-T6 aluminum with class-Ⅲ anodizing

Output & Runtime: 3V 1500mAh CR123A(Compatible 3.7v 650mAh RCR123A)

All performance claim to ANSI/NEMA FL1-2009 standard.

Do not use the rechargeable battery without protecting board

Operation instruction

To turn on the light, single-click the side switch, the flashlight outputs at the brightness level before last use, single-click again will turn the light off.

While the light is on, hold down the side switch to change the output brightness as the preset cycle of low-mediumhigh until the switch is released.

S1 Baton have 4 advantage function you can access by follow operations:

• Moonlight: from off state, press then hold the side switch for 1 second enables the low-lumen moonlight. - Direct access to high: from off state, double clicks directly activate high mode.
• Strobe: while on, triple-click the side switch to activate strobe mode, any other operation will quit the strobe.
• Timer: the S1 baton contains two timer settings, the flashlight will automatically shut down when the time arrive at the setting value of timers. While on, double clicks the side switch enters into timer modes, output will present short blinks - 1 blink means a 3 minutes timer, 2 blinks mean 9 minutes timer, and swap between 3 minutes or 9 minutes by doubl-click the side switch again.

Olight Technology Co., Limited
Address: 2/F, Building A, B3 Block, Fuhai Industrial Park, Fuyong, Bao'an District, Shenzhen, China 518103
Tel: +86-755-81452608/81452618
Fax: +86-755-81452508
E-mail: service@olightworld.com

olightworld.com